Heterocyclic Building Blocks-Tetrahydropyrans

110238-91-0, Methyl tetrahydro-2H-pyran-4-carboxylate is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,110238-91-0

Intermediate 108: Tetrahvdro-2H-pyran-4-ylmethanolMethyl tetrahydro-2H-pyran carboxylate (SC/143233, Aldrich) (5.0 g) in dry THF (10 ml.) was added drop wise to a cooled solution of 1 M lithium aluminium hydride in THF (32 ml_), keeping the temperature below 10 0C. On completion of the addition, the exotherm was allowed to subside before allowing the reaction mixture to warm to room temperature. The reaction was then stirred for 2 hours. The reaction was quenched with water (2 ml.) added very carefully and with cooling, followed by 2N sodium hydroxide (2 ml_). To resultant suspension was then added water (100 ml.) and then extracted with dichloromethane (100 ml_, 3 times). The organic layer was separated, combined and dried by passing through a hydrophobic frit. The organic was evaporated under reduced pressure to give colourless mobile oil that was then placed under high vacuo for 30 minutes at room temperature. This gave the title compound as colourless mobile oil (2.4367 g).1 H NMR (CDCI3): 4.04-3.96 (2H, m), 3.54-3.47 (2H, m), 3.46-3.36 (2H, m), 1.82 – 1.61 (3H, m), 1.57-1.50 (1 H, m), 1.40-1.27 (2H, m)

As the paragraph descriping shows that 110238-91-0 is playing an increasingly important role.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/101867; (2008); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

101691-94-5, 4-(Iodomethyl)tetrahydro-2H-pyran is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Reference Example 16 ethyl 2-(4-bromo-5-methoxy-1H-indazol-1-yl)-3-(tetrahydro-2H-pyran-4H-yl)propanoate [Show Image] To a solution of diisopropylamine (1.35 g) in a mixed solvent of tetrahydrofuran (30 mL) and 1,3-dimethyl-3,4,5,6-tetrahydropyrimidin-2(1H)-one (15 mL) was slowly added 1.6M hexane solution (16.1 mL) of n-butyllithium at -70C under a nitrogen atmosphere. The reaction mixture was stirred at -70C for 15 min, and a solution of ethyl (4-bromo-5-methoxy-1H-indazol-1-yl)acetate (3.65 g) in tetrahydrofuran (5 mL) was slowly added thereto. The reaction mixture was stirred at – 70C for 20 min, 4-(iodomethyl)tetrahydro-2H-pyran (2.80 g) was added thereto, and the mixture was stirred overnight at room temperature. To the reaction mixture was added 10% aqueous citric acid solution, and the mixture was extracted with ethyl acetate. The ethyl acetate layer was washed with saturated brine, dried (MgSO4), and concentrated. The obtained residue was subjected to silica gel column chromatography to give the title compound (1.36 g, yield 28%) as pale-yellow crystals from the fraction eluted with ethyl acetate-hexane (2:3, volume ratio). melting point 76-77C. MS:413(MH+)., 101691-94-5

The synthetic route of 101691-94-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Takeda Pharmaceutical Company Limited; EP2266983; (2010); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

83-87-4, (3R,4S,5R,6R)-6-(Acetoxymethyl)tetrahydro-2H-pyran-2,3,4,5-tetrayl tetraacetate is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of peracetylated or perbenzoylated sugars (300 mg) in 4 mL ofdry DCM at room temperature, TMSN3 (3 equiv) was added followed by the addition of AuBr3 (amounts of the catalyst are given in Table 1 and Table 2). The reaction mixture was stirred either at room temperature or heated to 55-60 C as mentioned in the Table 1 and Table 2. Then, the reaction was quenched byadding triethylamine (20 muL). The mixture was concentrated in vacuo and the crude product was purified by column chromatography.Alternatively, the reaction can be quenched by adding sodium bicarbonate solution followed by extraction with DCM(2 ¡Á 20 mL). The combined organic layers were washed with water, brine and dried over Na2SO4 and concentrated to dryness. The residue was purified by column chromatography on silica gel using petroleum ether (bp 60-70 C) and EtOAc., 83-87-4

83-87-4 (3R,4S,5R,6R)-6-(Acetoxymethyl)tetrahydro-2H-pyran-2,3,4,5-tetrayl tetraacetate 10293747, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Article; Rajput, Jayashree; Hotha, Srinivas; Vangala, Madhuri; Beilstein Journal of Organic Chemistry; vol. 14; (2018); p. 682 – 687;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.101691-94-5,4-(Iodomethyl)tetrahydro-2H-pyran,as a common compound, the synthetic route is as follows.

A mixture of (6a/?,9a5)-5,6a,7,8,9,9a-hexahydro-5-methyl-3-(phenylamino)-cyclopent[4,5]imidazo[l,2-alpha]pyrazolo[4,3-e]pyrimidin-4(2H)-one (50 mg, 0.155 mmol), 4-(iodomethyl)-tetrahydro-2H-pyran (70 mg, 0.310 mmol), and Cs2CO3 (101 mg, 0.310 mmol) in DMF (1 mL) is heated in microwave at 140 0C for 30 min. After cooling, the mixture is filtered through a 0.45 mum microflter, and the filtrate is purified by a semi-preparative HPLC to give pure product as white powder. MS (ESI) m/z 421.2 [M+H]+., 101691-94-5

The synthetic route of 101691-94-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; INTRA-CELLULAR THERAPIES, INC.; WO2009/75784; (2009); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

103260-44-2, Ethyl 2-(tetrahydro-2H-pyran-4-yl)acetate is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a mixture of ethyl 2-(tetrahydro-2H-pyran-4-yl)acetate(20 g, 116 mmol) in anhydrous THF (300 mE) was addedlithium aluminum hydride (8.8 g, 232 mmol) portionwise at0 C. The mixture was stirred at 11-13 C. for 18 h. TEC(petroleum ether: ethyl acetate=3: 1) showed no startingmaterial remaining. The mixture was quenched with water(9 mE), 10% aq. NaOH solution (9 mE) and water (18 mE)successively at 0 C., filtered and concentrated underreduced pressure to give crude 2-(tetrahydro-2H-pyran-4-yl)ethanol (11.7 g, 77%) as an oil, which was used for thenext step directly without further purification. ?H NMR(CDC13, 400 MHz): oe 3.86-3.90 (m, 2H), 3.58-3.61 (t, J=6.4Hz, 2H), 3.32-3.35 (t, J=11.6 Hz, 2H), 2.69-2.70 (m, 1H),1.61-1.63 (m, 3H), 1.54-1.60 (m, 2H), 1.43-1.45 (m, 2H).

103260-44-2, As the paragraph descriping shows that 103260-44-2 is playing an increasingly important role.

Reference£º
Patent; Vitae Pharmaceuticals, Inc.; Claremon, David A.; Yuan, Jing; Zhao, Wei; Zheng, Yajun; (54 pag.)US9481674; (2016); B1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.108-55-4,Dihydro-2H-pyran-2,6(3H)-dione,as a common compound, the synthetic route is as follows.

Paclitaxel-2-O-hemiglutarate was prepared according to the method described bySundaram et al. [38]. In brief, paclitaxel (100 mg, 0.117 mM) and glutaric anhydride (13.70 mg,0.12 mM) were dissolved in 15 mL of DCM, and 10 L of dry pyridine was added to the reactionmixture as a base catalyst. The reaction was stirred under nitrogen for 48 h at room temperature.The progress of the reaction was monitored by TLC using hexane:ethyl acetate (7:3, v/v). The crudemixture was purified by silica gel chromatography. The compound was obtained as a white solid(76 mg, 95% yield). HR-MS (ESI) (m/z) [C52H57NO17]: calcd 967.3626; found 968.3479 [M + H]+

108-55-4, 108-55-4 Dihydro-2H-pyran-2,6(3H)-dione 7940, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Article; El-Sayed, Naglaa Salem; Shirazi, Amir Nasrolahi; Sajid, Muhammad Imran; Park, Shang Eun; Parang, Keykavous; Tiwari, Rakesh Kumar; Molecules; vol. 24; 7; (2019);,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.23462-75-1,Dihydro-2H-pyran-3(4H)-one,as a common compound, the synthetic route is as follows.

To a suspension of 3-((1R,5S,9r)-9-methoxy-3-azabicyclo[3.3.1]nonan-9-yl)benzamide hydrochloride (300 mg, 0.97 mmol), dihydro-2H-pyran-3(4)-one (194 mg, 1.93 mmol) in tetrahydrofuran (16 ml) was added triethylamine (0.34 ml, 2.50 mmol) and the reaction mixture was stirred at room temperature for 20 minutes. Sodium triacetoxyborohydride (614 mg, 2.89 mmol) was added and the mixture stirred at room temperature overnight. The reaction was quenched with aqueous solution of sodium hydrogen carbonate and extracted with dichloromethane (*3). The combined organics were washed with brine, dried over MgSO4, filtered and concentrated under reduced pressure. The crude product was purified by silica chromatography eluting with 1-5% methanol in dichloromethane. The enantiomers were separated by chiral supercritical fluid chromatography to give 3-((1R,5S,9s)-9-methoxy-3-((S)-tetrahydro-2H-pyran-3-yl)-3-azabicyclo[3.3.1]nonan-9-yl)benzamide (81 mg, 25% yield) and 3-((1R,5S,9R)-9-methoxy-3-((R)-tetrahydro-2H-pyran-3-yl)-3-azabicyclo[3.3.1]nonan-9-yl)benzamide (71 mg, 19% yield). The stereochemistry was arbitrarily assigned.

23462-75-1, The synthetic route of 23462-75-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Alkermes, Inc.; Wynn, Thomas Andrew; Alvarez, Juan C.; Moustakas, Demetri Theodore; Haeberlein, Markus; Pennington, Lewis D.; US2019/241524; (2019); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

110238-91-0, Methyl tetrahydro-2H-pyran-4-carboxylate is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To 250 mL of LiAlH4 (2.3 M solution in THF, 0.58 mol) in THF (200 mL) is added dropwise a solution of 130 mL (0.974 mol) of tetrahydro-pyran-4-carboxylic acid methyl ester in THF (900 mL) under nitrogen atmosphere. The temperature is kept at 40-45 C. with an ice-bath. Upon complete addition, the reaction is stirred at RT for 1.5 h. The reaction is cooled in an ice-bath and quenched with addition of water (22 mL), 15% aq. NaOH solution (21 mL) and water (66 mL). The resulting precipitate is removed by filtration through Celite and is rinsed with THF (300 mL). The filtrate is concentrated under reduced pressure to afford 102.5 g of (tetrahydro-pyran-4-yl)-methanol. Yield: 91%, 110238-91-0

The synthetic route of 110238-91-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Boehringer Ingelheim International GmbH; Riether, Doris; Binder, Florian Paul Christian; Doods, Henri; Mueller, Stephan Georg; Nicholson, Janet Rachel; Sauer, Achim; US8865744; (2014); B1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.344329-76-6,Tetrahydro-2H-pyran-4-carboxamide,as a common compound, the synthetic route is as follows.

d) Tetrahydropyran-4-carbonitrile can be prepared as follows: Slowly add 10 cm3 of thionyl chloride to 3 g of tetrahydropyran-4-carboxamide cooled on an ice bath. Heat the mixture at 80¡ã C. for two hours, then concentrate under vacuum. Take up the residue in 20 cm3 of water and adjust the pH of the solution to pH 7 with potassium hydroxide. Extract the aqueous phase with ethyl acetate (4*50 cm3). The combined organic phases are washed with water (2*50 cm3), dried over magnesium sulphate, and then concentrated under vacuum to obtain 2.47 g of tetrahydropyran-4-carbonitrile., 344329-76-6

344329-76-6 Tetrahydro-2H-pyran-4-carboxamide 13197203, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Patent; sanofi-aventis; US2009/253679; (2009); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

1240390-36-6, tert-Butyl ((3R,4R)-4-aminotetrahydro-2H-pyran-3-yl)carbamate is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 1. Into a 25 mL round flask containing a solution of tert-butyl ((3R,4R)-4-aminotetrahydro-2H-pyran-3-yl)carbamate (100 mg, 0.5 mmol) in dichloromethane (5 mL) were added triethyl amine (0.15 mL, 0.9 mmol) and benzyl chloroformate (0.1 mL, 0.7 mmol) and the reaction mixture was stirred at room temperature for 2 h. The reaction mixture was diluted with dichoromethane and washed with saturated sodium bicarbonate, water, and brine solution sucessively. The organic fraction was dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure. The crude produt was purified by flash chromatography eluting with ethyl acetate in petroleum ether (20-25%) to get benzyl tert-butyl ((3R,4R)- tetrahydro-2H-pyran-3,4-diyl)dicarbamate as a liquid. NMR (CDCl3, 400 MHz): delta 7.37-7.35 (m, 5H), 5.45 (brs, 1H), 5.12 (s, 2H), 3.94-3.81 (m, 4H), 3.59-3.53 (m, 1H), 2.01-1.96 (m, 2H), 1.45 (s, 9H). MS calc’d [M-Boc+H]+ 251.2, found 251.2., 1240390-36-6

As the paragraph descriping shows that 1240390-36-6 is playing an increasingly important role.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; LIM, Jongwon; ALTMAN, Michael, D.; CHILDERS, Matthew, L.; GIBEAU, Craig, R.; HO, Ginny Dai; TSUI, Honchung; (80 pag.)WO2016/144844; (2016); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics