New learning discoveries about 125552-89-8

125552-89-8 4-(Bromomethyl)tetrahydropyran 2773286, aTetrahydropyrans compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.125552-89-8,4-(Bromomethyl)tetrahydropyran,as a common compound, the synthetic route is as follows.

Ethyl 2,4-dioxo-3- (p-tolyl) -1,2,3,4-tetrahydropyrimidine-5-carboxylic acid (3.76 g, 13.7 mmol, 1.0 eq) was dissolved in DMF (45 mL) To this, 4- (bromomethyl) tetrahydro-2H-pyran (4.88 g, 27.4 mmol, 2.0 eq) and potassium carbonate (5.67 g, 41.1 mmol, 3.0 eq) were added. The reaction was heated to 60 C for 4 hours. After the reaction was detected by LC-MS and TLC, the temperature was lowered to room temperature, suction filtered, the filtrate was poured into water (50mL), and extracted with EA (50mL ¡Á 3). The organic phases were combined, washed with brine three times, dried, filtered, and concentrated. Silica gel column chromatography (100-200 mesh silica gel, PE / EA = 0-50%) was purified to obtain an off-white solid (1.9 g, yield: 37%)., 125552-89-8

125552-89-8 4-(Bromomethyl)tetrahydropyran 2773286, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Patent; Nanjing Yaojie Good Health Biological Technology Co., Ltd.; Wu Yongqian; Li Lin; Wan Zhonghui; (107 pag.)CN110041316; (2019); A;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

Some tips on 65412-03-5

65412-03-5 4-(2-Aminoethyl)tetrahydro-2H-pyran 2773198, aTetrahydropyrans compound, is more and more widely used in various fields.

65412-03-5,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.65412-03-5,4-(2-Aminoethyl)tetrahydro-2H-pyran,as a common compound, the synthetic route is as follows.

Place 2- (4-FORMYLPHENOXY) thiazole-5-carboxamide (Example 12, Part D) (0.187 g, 0.755 MMOL), 2-(tetrahydropyran-4-yl)ethylamine (0.101 g, 0.831 mmol) and 3A molecular sieves in a vial. Add methanol (3.8 mL), cap and stir overnight. Add NaBH4 (0.029 g, 0.755 mmol) and stir until the gasses stop evolving. Load the reaction mixture directly onto a 25 g ISCOO pre-load column. Dry the column in a vacuum oven at room temperature. Purify by eluting through a 40 g LSCO) column with 10% (2. 0 M NH3 in methanol) in ethyl acetate over 45 minutes to give the title compound as a free base. Dissolve the compound in dichloromethane: methanol (2 : 1) (3 mL) and add 1 equivalent of 0.50 M methanesulfonic acid in dichloromethane. Stir the solution for a short time before concentrating to give the title compound: TOF MS ES+ 362.1 (M+H) +, HRMS calcd for CL8H24N303S 362. 1538 (M+H) +, found 362.1536, time 0.32 min ; HPLC [YMC- Pro pack C-18 (150 x 4.6 mm, S-5 MICRON1), 0.05% TFA/acetonitrile in 0.05% TFA/water at 1. 0 ML/MIN, 10-20% OVER 5 min, 20-95% over 18], tR = 8. 0 min, 95. 0% purity.

65412-03-5 4-(2-Aminoethyl)tetrahydro-2H-pyran 2773198, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Patent; ELI LILLY AND COMPANY; WO2004/80996; (2004); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

Analyzing the synthesis route of 1194-16-7

As the paragraph descriping shows that 1194-16-7 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1194-16-7,2,2-Dimethyltetrahydropyran-4-one,as a common compound, the synthetic route is as follows.

To a solution of benzyloxycarbonyl-a-phosphonoglycine trimethyl ester (1.163 g, 3.52 mmol) in dry DCM (20 mL) was added DBU (0.534 g, 3.52 mmol) dropwise at 0C. Then a solution of compound cap 3a (1.8 g, 14.08 mmol) in dry DCM (20 mL) was added dropwise at 0C. The reaction mixture was stirred at 25C for 3 days. After removal of the solvent, the residue was purified using Si02 chromatography (e luting with petroleum ether/ ethyl acetate = 5: 1 to 3: 1) to providecompound cap 3b as white solid (0.15 g, 13% yield). 1H NMR (CDC13): delta 7.30-7.35 (m, 5 H), 5.11 (s, 2 H), 3.82-3.88 (m, 3 H), 3.09-3.16 (m, 2 H), 1.84 (s, 2 H), 1.48 (s, 2 H), 1194-16-7

As the paragraph descriping shows that 1194-16-7 is playing an increasingly important role.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; YU, Wensheng; TONG, Ling; KOZLOWSKI, Joseph A.; SELYUTIN, Oleg; CHEN, Lei; KIM, Jae-Hun; SHA, Deyou; RIZVI, Razia; SHANKAR, Bandarpalle; HU, Bin; ZHONG, Bin; WAI, Dahai; HAO, Jinglai; WEI, Wei; JI, Tao; ZAN, Shuai; WO2014/110705; (2014); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

Some tips on 40191-32-0

40191-32-0 Tetrahydro-2H-pyran-4-carbonyl chloride 2795505, aTetrahydropyrans compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.40191-32-0,Tetrahydro-2H-pyran-4-carbonyl chloride,as a common compound, the synthetic route is as follows.

Intermediate 4: [(S)-1 -(Tetrahydro-pyran-4-carbonyl)-pyrrolidin-3-yl]-carbamic acid tert-butyl ester; To a vigorously stirring solution of tetrahydro-2H-pyran-4-carbonyl chloride (0.455 g, 3.06 mmol) in CH2CI2 (10 mL) was added simultaneously portionwise sat. NaHC03(aq) (10 mL) and a solution of the (S)-pyrrolidin-3-yl]-carbamic acid tert-butyl ester (570 mg, 3.06 mmol) at rt. The resulting biphasic mixture was stirred vigorously at rt for 3h. The organic layer was separated by filtration through a phase separation tube, concentrated in vacuo and purified by flash chromatography on silica gel with CH2CI2 / MeOH to give [(S)-1 -(tetrahydro-pyran-4- carbonyl)-pyrrolidin-3-yl]-carbamic acid tert-butyl ester as a colourless gum (0.623 g, 68% yield) LCMS: [M+H]+= 299.6, Rt (7)= 0.73 min., 40191-32-0

40191-32-0 Tetrahydro-2H-pyran-4-carbonyl chloride 2795505, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Patent; NOVARTIS AG; COOKE, Nigel Graham; FERNANDES GOMES DOS SANTOS, Paulo; GRAVELEAU, Nadege; HEBACH, Christina; HOeGENAUER, Klemens; HOLLINGWORTH, Gregory; SMITH, Alexander Baxter; SOLDERMANN, Nicolas; STOWASSER, Frank; STRANG, Ross; TUFILLI, Nicola; VON MATT, Anette; WOLF, Romain; ZECRI, Frederic; WO2012/4299; (2012); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

Brief introduction of 185815-59-2

185815-59-2, As the paragraph descriping shows that 185815-59-2 is playing an increasingly important role.

185815-59-2, 4-Isobutyldihydro-2H-pyran-2,6(3H)-dione is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

KR of thiol 28 with simultaneous enantioselective synthesis of a ( ?)-Pregabalin precursor; [00120] A 20 mL reaction vial containing a stirring bar was charged with 3-isobutylglutaric anhydride (4) (102.1 mg, 0.60 mmol) and 1 8 (47.2 mg, 0.080 mmol). The reaction vial was flushed with argon and fitted with a septum. MTBE was then injected (4.0 mL, 0.2M) and the solution cooled to -30 C. 28 (0.30 mmol) was added dropwise via syringe and the resulting solution was stirred for 48 h. The mixture was the immediately loaded onto a column and the ‘slow reacting’ thiol enantiomer separated from the mixture by flash-chromatography (71 .0 mg, 0.39 mmol, 98.7% ee as determined by CSP-HPLC after derivatisation as per general procedure B). The hemithioester product (29) was suspended in aq. NH3 (3 mL) and stirred at room temperature for 4 h. The reaction was then diluted with CH2CI2 (10.0 mL) and H20 (5.0 mL) and transferred to a separating funnel. The organic and aqueous layers were separated and the aqueous layer was extracted with CH2CI2 (2 x 10.0 mL). The combined organic layers were then dried over MgS04 and the solvent removed under reduced pressure affording the ‘fast reacting’ (S)-thiol enantiomer (62.4 mg, 0.35 mmol, 95.5% ee as determined by CSP-HPLC after derivatisation as per general procedure B) after flash chromatography. Conversion = 50.8%, S Factor = 226.[00121 ] The aqueous layer was then acidified by addition of HCI (8 N) and extracted with EtOAc (5 x 15 mL). The combined organic phases were then dried over magnesium sulphate and the solvent was removed under reduced pressure to afford the desired hemiamide as a white solid (71 .2 mg, 0.38 mmol, 97.0% ee as determined by CSP-HPLC after transformation to the corresponding o-nitrophenoxy ester, as per the procedure reported below).[00122] 1H NMR spectrum of (S)-30 (400 MHz, DMSO-d6): delta 12.0 (br s, 1 H), 7.27 (s, 1 H), 6.74 (s, 1 H), 2.22-1 .91 (m, 5H), 1 .66-1 .51 (m, 1 H), 1 .09 (app t, J 6.6, 2H), 0.81 (d, J 6.6, 6H). 13C NMR (100 MHz, DMSO-d6): delta 174.3 (q), 173.9 (q), 43.6, 40.2, 39.2, 30.1 , 25.0, 23.2, 23.1. HRMS (m/z): [M+Na]+ calcd. for C9H17N03Na 210.1 106; found, 210.1 1 14.; Synthesis of Pregabalin [( ?)- 3-(aminomethyl)-5-methylhexanoic acid]; [0066] To demonstrate the potential utility of this methodology, the KR of thiol 28 (0.80 mmol) was carried out with catalyst 18 in the presence of achiral anhydride 4, which furnished (R)-28 (0.39 mmol, 99% ee) and the ring-opened product 29 (0.40 mmol) with excellent efficiency at 51 % conversion as shown in Figure 1 . Thioester 29 (as a mixture of diastereomers) was then treated with aqueous ammonia, resulting in its cleavage to afford the other thiol enantiomer (S)- 28 (96% ee, 0.35 mmol) and the aminolysed product (S)-30 (97% ee, 0.38 mmol), again with high efficiency. Hemiamide (S)-30 is a precursor which can be converted in a single step to the (R)-antipode of the anticonvulsive agent Pregabalin and thus this sequence – in addition to serving as a highly efficient KR of 28 – constitutes a rapid and convenient formal synthesis of the ‘blockbuster’ drug (marketed as ‘Lyrica’).

185815-59-2, As the paragraph descriping shows that 185815-59-2 is playing an increasingly important role.

Reference£º
Patent; THE PROVOST, FELLOWS AND SCHOLARS OF THE COLLEGE OF THE HOLY AND UNDIVIDED TRINITY OF QUEEN ELIZABETH, NEAR DUBLIN; CONNON, Stephen Joseph; PESCHIULLI, Aldo; PROCURANTI, Barbara; WO2011/70028; (2011); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

Simple exploration of 1194-16-7

The synthetic route of 1194-16-7 has been constantly updated, and we look forward to future research findings.

1194-16-7, 2,2-Dimethyltetrahydropyran-4-one is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of 2,2-dimethyloxan-4-one (2.00 g, 15.6 mmol), sulfur (500 mg, 15.6 mmol), cyanamide (656 mg, 15.6 mmol and pyrrolidine (13 muL¡¤, 0.156 mmol) was stirred in isopropanol (3 mL) at room temperature for 3h. The reaction mixture was filtered to remove excess sulfur and chromatographed on silica, eluting with 5% MeOH in DCM to afford the title compound as a yellow solid (2.87 g, 47 ). 1H NMR (500 MHz, CDC13) delta 4.94 (br. s., 2H), 4.64 (t, J=1.8 Hz, 2H), 2.56 (s, 2H), 1.34 – 1.30 (s, 6H)., 1194-16-7

The synthetic route of 1194-16-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; BROMIDGE, Steven; BURCH, Jason; HEIFETZ, Alexander; KRULLE, Thomas; MONTALBETTI, Christian A.G.N.; PEI, Zhonghua; PEREZ-FUERTES, Yolanda; TRANI, Giancarlo; (223 pag.)WO2016/1341; (2016); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

Simple exploration of 951127-25-6

951127-25-6 tert-Butyl ((2R,3S)-2-(2,5-difluorophenyl)-5-oxotetrahydro-2H-pyran-3-yl)carbamate 44193925, aTetrahydropyrans compound, is more and more widely used in various fields.

951127-25-6, tert-Butyl ((2R,3S)-2-(2,5-difluorophenyl)-5-oxotetrahydro-2H-pyran-3-yl)carbamate is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,951127-25-6

12b (0.28 g, 1.2 mmol) was dissolved in dimethylacetamide (4 mL) at room temperature,Intermediate 1 (0.39 g, 1.2 mmol) and benzenesulfonic acid (0.22 g, 1.2 mmol) were added and stirred at room temperature for 1 hour.Sodium tris (acetoxy) borohydride (0.33 g, 1.4 mmol) was added to the reaction solution, and the reaction was continued at room temperature for 16 hours.After cooling to 0 C, water (30 mL) and ammonia (1 mL) were added successively to precipitate a white solid which was filtered and washed with water (10 mL x 2) and dried.The filter cake was dissolved in dichloromethane (150 mL), dried over anhydrous magnesium sulfate, filtered and the filtrate was concentrated under reduced pressure to give soil yellow solid 12c (0.30 g, yield 46.0%).

951127-25-6 tert-Butyl ((2R,3S)-2-(2,5-difluorophenyl)-5-oxotetrahydro-2H-pyran-3-yl)carbamate 44193925, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Patent; Sichuan Haisco Pharmaceutical Co.,Ltd; FAN, JIANG; CHEN, QINGPING; JIANG, WEI; ZHENG, SUXIN; YE, FEI; (128 pag.)TW2017/8221; (2017); A;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

Simple exploration of 951127-25-6

951127-25-6 tert-Butyl ((2R,3S)-2-(2,5-difluorophenyl)-5-oxotetrahydro-2H-pyran-3-yl)carbamate 44193925, aTetrahydropyrans compound, is more and more widely used in various fields.

951127-25-6, tert-Butyl ((2R,3S)-2-(2,5-difluorophenyl)-5-oxotetrahydro-2H-pyran-3-yl)carbamate is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,951127-25-6

N-[(2R,3S,5R)-2-(2,5-difluorophenyl)-5-(6-methoxy-1,3,4,9-tetrahydropyrido[3,4 -b] ind-2-yl)tetrahydropyran-3-yl]carbamic acid tert-butyl ester (60 mg, 0.12 mmol)soluble in methanol (0.5mL), add methanol solution of hydrogen chloride (2 mL, 3.0 mol/L), The reaction was carried out for 1 hour at room temperature. Add solid sodium bicarbonate to adjust pH=8, Filtered, the filtrate was concentrated, The residue was subjected to silica gel column chromatography [dichloromethane/methanol (v/v) = 9/1] purified, the title compound was obtained (22 mg, yield 46%, HPLC purity 92.6%). It is a yellow solid.

951127-25-6 tert-Butyl ((2R,3S)-2-(2,5-difluorophenyl)-5-oxotetrahydro-2H-pyran-3-yl)carbamate 44193925, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Ruyuan Yong Xing Technology Services Co., Ltd.; Li Jianhao; Gu Zheng; Tang Wanjun; Kang Panpan; Zhang Zongyuan; Deng Xinshan; Wang Xuli; (52 pag.)CN109928971; (2019); A;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

Brief introduction of 19752-84-2

Big data shows that 19752-84-2 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.19752-84-2,Tetrahydro-2H-pyran-3-ol,as a common compound, the synthetic route is as follows.

EXAMPLE IDSTEP 2: Displacement of the leaving group with 6 membered 3- hydroxyheteroalkoxyalkyl compounds for the synthesis of 42-0-(heteroaIkoxyaIkyl) rapamycin compound.Preparation of 42-0-(tetrahydropyran-3-yl), rapamycin (Merilimus 3)A reaction flask containing triflate intermediate of step-1 was further cooled to -50 C temperature and 6.07 grams (46mmol) of N,N-di-n-butylethylamine (DNBEA) followed by 1.17 grams (13.8mmol) of tetrahydropyran-3-ol compound in methylene chloride were added. The reaction mixture was stirred at -10 C temperature for 12 hours. The reaction mixture was then allowed to warm to 15 C temperature and continuously stirred for 48 hours.The reaction mixture was further concentrated by evaporation under reduced pressure to provide a pale yellow viscous mass. The quantitative HPLC of reaction mass shows theoretical yield of 62%. This mass was purified by preparative HPLC (MeOH (65%): ACN (15%): H20 (20%)) to obtain the desired product in about 65% purity. Further purification was done by combiflash (0-40% EtOAc in Hexane) to get 42-0- (tetrahydropyran-3-yl) rapamycin compound having 97.3% purity by HPLC. Then stabilizing agent BHT in acetone was homogeneously mixed with purified compound and isolation & drying steps were carried out to get white solid powder of 42-0- (tetrahydropyran-3-yl) rapamycin compound. C56H87N014 Mol. Wt.: 998.2742-0-(tetrahydropyran-3-yl), rapamycin REACTION SCHEME-DThe 42-0-(tetrahydropyran-3-yl) rapamycin compound thus obtained was analytically identified., 19752-84-2

Big data shows that 19752-84-2 is playing an increasingly important role.

Reference£º
Patent; MERIL LIFE SCIENCES PVT. LTD; RANE, Dhananjay, Sharad; VYAS, Rajnikant, Gandalal; MINOCHA, Pramod, Kumar; WO2012/17449; (2012); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

Some tips on 23462-75-1

23462-75-1 Dihydro-2H-pyran-3(4H)-one 90109, aTetrahydropyrans compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.23462-75-1,Dihydro-2H-pyran-3(4H)-one,as a common compound, the synthetic route is as follows.

Example 96A 6,7-dihydro-4H-pyrano[3,4-d]thiazol-2-amine To a solution of lithium diisopropylamide (2.5 mL, 5.0 mmol, 2M in THF, Aldrich) in THF (20 mL) was added drop wise dihydro-2H-pyran-3(4H)-one (0.5 g, 5 mmol, Small Molecules Inc) in THF (2 mL) at -78 C. The reaction mixture was stirred at -45 C. for 2 hr and then cannulated to a solution of sulfur (0.16 g, 5.0 mmol) in THF (20 mL) at -45 C. The reaction mixture was warmed to 0 C. and a solution of cyanamide (0.42 g, 10.0 mmol) in THF (2 mL) was added. After stirring for overnight, the reaction mixture was quenched with saturated NaHCO3 (10 mL). The aqueous layer was extracted with ethyl acetate (3*20 mL). The combined organic extracts were dried (Na2SO4), filtered and concentrated. The residue was purified by column chromatography using an Analogix Intelliflash280 (SiO2, 0-5% methanol in dichloromethane) to afford 0.1 g (10%) of the title compound. MS (ESI+) m/z 157 (M+H)+., 23462-75-1

23462-75-1 Dihydro-2H-pyran-3(4H)-one 90109, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Patent; ABBOTT LABORATORIES; US2008/242654; (2008); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics